Magician Lite
4-Axis · 250 g
Supplied, integrated and supported by Zeta42 across the UAE and the GCC, with the engineering to put it into a line and the training for the people who will run it afterwards.
At a glance
- Payload
- 250 g
- Reach
- 340 mm
- Repeatability
- ±0.2 mm
- DOF
- 4
- Weight
- 2.4 KG
What it does
Built for.
- Complete robotics courses at several levels, taught chapter by chapter
- DobotLab block programming that enables AI functions
- Magic Box external controller with 12 communication interfaces plus Bluetooth
- Collision detection for learner safety
Where it is used
Applications.
- K12 classroom robotics
- Face, image, OCR and speech recognition through the AI camera
- Pen holding and drawing, suction pick-up, soft gripping
Specifications
The full sheet.
- Degree of Freedom 4
- Maximum Load 250 g
- Max Reach 340 mm
- Repeatability ±0.2 mm
- Voltage 100V - 240V AC,50/60 Hz
- Power Input 12V ～ 5A DC
- Working Environment -5° ～ 45° C
- Power 60W Max
- Communication USB Virtual Serial Port / Serial Port
- Software DobotStudio/DobotLab
- Weight 2.4 KG
- Rear Arm / Forearm 150 mm
- Base Size 146 mm x 146 mm
- Magic Box
- MCU ARM 32-bit Cortex-M4
- Main Frequency 168 MHz
- Communication USB Virtual Serial Port/Serial Port/Bluetooth
- Programming Language MicroPython
- Weight 98 g
- Size 95 mm x 80 mm x 21.5 mm
- Axis Motion
- Axis 1- Base -135° to +135°
- Axis 2- Rear Arm -5° to +80°
- Axis 3- Fore Arm -10° to +85°
- Axis 4- End Tools -145° to +145°
- J1-J3 Max speed 300°/s
- J4 Max speed 200°/s
- End Tools
- Pen Holder Pen Diameter: 8-12 mm
- Suction Cup Built-in air pump drive works under negative pressure, with suction cup diameter of 10mm, 20mm
- Soft Built-in air pump drive works under positive and negative pressure, with maximum opening and closing
- Gripper distance of 50 mm
- Expansion Interface
- Power Interface 2 4PIN, 12V～3A DC
- Multi-Functional Communication Interface 2 10PIN, Serial Communication Interface
- I/O Interface 6 Green Terminal, 4PIN, 3.3V/5V-IO, 5V 1A-VCC, Multi-Function Multiplexing Interface, User-Defined I/O, AD, PWM Output, I2C, etc
- Stepper Motor Interface 2 Yellow Terminal, 4PIN, 2-Phase Stepper Motor, 16 Subdivision, 12V 1A
- 12V Power Interface 2 Red Terminal, 2PIN, 12V, 3A Max
- AI Camera Kit
- Dimensions 50mm*44mm*25mm
- CMOS 1/4inch
- Image pixels 1M
- Image Format YUV/MJPG
- Data Format 240*320. 640*480. 1280*720
- Maximum Image Transfer Rate 1280*720@30fps
- Camera Control Saturation，Contrast, Acutance
- White balance Auto
- Exposure Auto
- Working Temperature 0℃ to +50℃
- Operating voltage DC 5V
- Interface USB2.0
- Voice input Integrated microphone
- Feature All-in-one design, integrated microphone, distortion-free lens
- Camera working angle 0°-135°
- Function Face recognition, image recognition, OCR text recognition, speech recognition, etc.Software Dobotlab
- 4 DOF · max load 250 g · max reach 340 mm · repeatability ±0.2 mm
- Axes -135~+135°, -5~+80°, -10~+85°, ±145° · J1 to J3 300°/s, J4 200°/s
- Magic Box controller: ARM 32-bit Cortex-M4, 168 MHz, MicroPython, Bluetooth, 98 g
- AI Camera Kit: 1 MP, 1280×720 @30 fps, USB 2.0, integrated microphone
Figures published by DOBOT. Performance figures are laboratory results and vary with the application.
Specifications published by DOBOT: Official product page.
In the same range
Education robots.
- DOBOT Magician: Basic Version
- Vision Kit
- MagicianGo
- Magician E6 Robot
- E6 AMMR: Autonomous Mobile Manipulation Base
- Training System Without PLC
Specification sheets answer the second question. The first one is usually whether a robot suits the job at all, and that is answered by watching the task rather than by reading a table, which is what an assessment visit is for.
Pricing is quoted case by case.